Fluorocarbon overview: Main line or leader
Baitcaster: fluorocarbon works fine as a main line. Spinning: it works but needs care, so most anglers run a PE main line + FC leader.
| Use | Reel | Line | Notes |
|---|---|---|---|
| FC main line | Baitcaster | 10–25 lb, usually stiffer | Clear bottom feel, abrasion; it sinks, so less bow |
| FC main line | Spinning | 4–10 lb soft | Memory: underfill slightly, retrieve under tension; if it keeps springing off, switch to PE + leader |
| Leader on PE | Spinning, baitcaster | PE number × 2.5–4 | Length and knots: braid · leaders and knots |
| Carolina rig | Baitcaster | FC main + FC leader | Both sides of the weight touch bottom |
| Topwater trebles | Any | Not FC | It sinks and pulls the nose down: use nylon |
Carolina rig: two contact zones
| Section | Where it rubs | Use |
|---|---|---|
| Above the weight | The main line drags behind the weight over rock and shell | FC main line, or PE with a tough contact section |
| Below the swivel | The leader lies on the bottom | FC leader, stiffer for fewer tangles |
- A short FC leader on PE does not protect the braid above the weight.
- On clean sand or mud, where long-range feel matters, a PE main line is fine: all-FC is not the only answer.
- Lines sold as "leader" are usually positioned on abrasion or thinness (maker positioning); the material is the same fluorocarbon.
← Soft vs stiff · Diameter, strength and abrasion →
Fluorocarbon overview
Fluorocarbon in six tables: soft vs stiff, main line or leader, diameter and abrasion, sinking and visibility, colour, knots and care.
Chapitres liés
- Achigan GB · Vision — Fluorocarbon: what 'invisible' really buys, and what diameter and stiffness do to bait action
- Matériau de la ligne — Fluorocarbon against braid and nylon